PodoTronic V310 Dust Extraction Drill – Professional Nail & Beauty Drill

The PodoTronic V310 Dust Extraction Drill has a sleek and modern design and weighs just 3kg, making it ideal for both surgery and domiciliary use. The efficient and reliable vacuum motor brings outstanding performance with optimal noise insulation. The PodoTronic handpiece is lightweight and comfortable and benefits from a wide aperture for use with abrasive discs.

Key Features and Benefits

• Burr speed adjustment up to 30,000 rpm
• 5 levels of powerful dust extraction
• Handpiece offers excellent access for cleaning
• Noise level 58 dB
• Lightweight, comfortable handpiece

How to use

Initial Setup

Insert burr: Ensure the unit is off. Insert and secure a standard 2.35 mm burr. Never run the drill without a burr or blank pin.
Check filter: Make sure a clean dust bag is fitted correctly.
Connect power: Plug in the unit and switch the main power to On.

Operation

Select direction: Choose Fwd/Rev as required.
Set speed: Start at a low RPM (5,000–10,000) and increase as needed.
Activate suction: Turn on the vacuum and adjust the suction level.
Begin treatment: Hold the handpiece like a pen, steady your hand, and use light pressure.

Shut Down & Clean-Up

Stop: Switch off the motor and suction.
Remove burr: Pull the burr straight out and clean/disinfect it immediately.
Wipe down: Clean the handpiece and unit with a damp cloth or compatible non-alcohol disinfectant wipe.

Primary Uses

Thickened nails: Reduce severely thickened or fungal nails using suitable burs.
Callus & hard skin: Smooth thick calluses on heels, balls of the feet, and weight-bearing areas.
Corn removal: Carefully remove hard, painful corn cores with appropriate burs.
Fungal nail debridement: Remove damaged nail tissue to prepare for topical treatment.
Nail edging & shaping: Smooth rough edges and clear debris from nail folds and under the free edge.
Prosthetic nail preparation: Shape and prepare nails before therapeutic gel reconstruction.

FAQs

How many dust extraction settings does the V310 have?
The V310 features 5 levels of powerful dust extraction, giving you greater control over dust collection during use.

How much does the PodoTronic V310 weigh?
The complete V310 unit weighs just 3kg, making it practical for both salon and domiciliary use.

Is the PodoTronic V310 suitable for domiciliary use?
Yes. Its compact 3kg design makes the V310 particularly convenient for professionals who need to transport their equipment between locations.

Can the handpiece be used with abrasive discs?
Yes. The handpiece features a wide aperture designed to accommodate abrasive discs, it uses a self-locking chuck system compatible with standard 2.35 mm (3/32 inch) burrs

How does the dust extraction filter system work?
It uses a powerful vacuum and medical-grade filtration that traps 99% of particles larger than 1.0 micron and 90% of particles larger than 0.5 micron.

When should the filter bag be replaced?
The unit includes an operating hours counter. It alerts you to change the filter when it reaches 20 total hours (with a reminder starting at 10 remaining hours) to prevent turbine overheating or bag bursting.

Can I use liquids or sprays with this drill?
No, you should avoid using liquids or sprays while drilling because moisture will clog the handpiece and internal suction tubes.

Important: Please be aware that the PodoTronic V310 Dust Extraction Drill is not classified as a Medical Device and is only compliant for use within the Beauty Industry.